Skip to main content
TipRanks
Go Ultimate75% OFF

ITT (2II) Q3 2026 Earnings Report

3 Followers

DE:2II Q3 2026 EPS Results

Actual EPS
EUR 2.04
Consensus EPS
EUR 1.87
Beat/Miss
Beat by +EUR 0.16
One Year Ago EPS
EUR 1.60

DE:2II Q3 2026 Revenue Results

Actual Revenue
EUR 1.30B
Expected Revenue
EUR 1.28B
Beat/Miss
Beat by +EUR 21.71M
YoY Revenue Growth
+44.19%

Earnings Announcement Details

Quarter
Q3 2026
Date
11/04/2026
Time
After Close
Conference Call
Wednesday, November 4, 2026
DE:2II Upcoming Earnings

ITT's next earnings date is estimated for February 11, 2027, based on past reporting schedules.

Q3 2026 Earnings Call Audio

DE:2II Q3 2026 Earnings Call
0:00 / 0:00

Q3 2026 Earnings Slide Deck

Q3 2026 Earnings Call Summary

Q3 2026
Earnings Call Date:Nov 04, 2026|% Change Since:5.97%|
Earnings Call Sentiment|Positive

The call was strongly positive. Highlights significantly outweighed the lowlights, with record or expanding margins, strong order and backlog growth, raised revenue, EPS and free cash flow guidance, robust cash generation, accelerating SPX FLOW synergies and favorable aerospace, defense and Flow Technologies trends. The main challenges were Middle East cost and order timing issues, negative Flow Technologies mix and acquisition dilution, automotive and calendar headwinds, and ongoing customer pricing pressure in Motion Technologies.

Company Guidance

For 2026, ITT raised its full year organic revenue guidance range to 7% to 9% growth, expects adjusted operating margin expansion of over 100 basis points to approximately 20.6% at the midpoint, and raised adjusted EPS outlook to $8.58 at the midpoint, a $0.36 increase and 19% growth year-over-year; the effective tax rate is 23.75% as of Q3, SPX FLOW’s net contributing is expected to be over $0.20, free cash flow guidance was raised to a $610 million midpoint with a free cash flow margin of approximately 11%, and the year-end leverage ratio is expected to be approximately 2.1x. SPX FLOW is expected to deliver high single-digit growth for the full year in 2026, with savings of over $20 million by year-end and an annual run rate greater than $30 million.

  • Strong Third-Quarter Financial PerformanceITT grew orders 58%, including 20% organically, and revenue 44%, including 8% organically, with a quarterly book-to-bill of 1.08. Operating margin expanded 140 basis points to 21% for the first time, adjusted EPS increased 20% year-over-year to $2.26, and year-to-date free cash flow reached $464 million, up 26% from the prior year.
  • Broad-Based Order MomentumManagement said orders were the highlight of the quarter, supported by aerospace recovery, defense content expansion, healthy project activity and market share gains across the portfolio. CCT organic orders grew 55%, KONI orders grew 24%, Flow Technologies orders grew 108% overall and 11% organically, and SPX FLOW mixers and Waukesha Cherry-Burrell orders grew 6% and 10%, respectively.
  • CCT Growth Led by Aerospace, Defense and ConnectorsCCT organic revenue grew 19% and organic orders grew 55%. Controls orders increased 34%, connectors orders increased 37% after increasing 38% in the prior quarter, and connectors industrial revenue grew 31% globally, mainly through distribution. Commercial aerospace benefited from increasing production rates and pricing actions, while European defense wins and kSARIA's expanding presence on major programs supported defense growth.
  • kSARIA Market Share Gains and Defense VisibilitykSARIA orders increased 146% in the prepared remarks, driven by awards for submarine, tactical radio and F-35 platforms. In Q&A, management also cited 136% growth and said kSARIA is participating in the Virginia and Columbia Class submarine programs, F-35 fighter programs and missile programs. Management said kSARIA has a healthy short- and medium-term backlog and growing participation across key defense programs.
  • CCT Backlog Provides Forward VisibilityManagement said CCT backlog for the fourth quarter and 2027 was more than 30% above the level at the same point last year, while long-term platform backlog was up more than 100%. Management expects aerospace recovery and defense spending to continue providing market tailwinds and said the team continues to win market share.
  • CCT Margin Expansion and InvestmentCCT operating margin expanded 100 basis points year-over-year to a record 22%, as volume and pricing actions more than offset inflationary pressures. kSARIA's margin expanded to over 19%, benefiting from pricing and operating leverage. ITT continues to invest in engineering resources, automation and capacity to support current backlog and future share gains.
  • Motion Technologies Outperformed Vehicle ProductionMotion Technologies grew organic revenue 2% and outperformed global vehicle production across all regions, with year-to-date outperformance of 506 basis points. Its operating margin expanded 70 basis points to 21%, as 140 basis points of net productivity more than offset customer pricing pressures in friction.
  • Motion Technologies Maintains 21% Margin FloorManagement described 21% as the new floor for Motion Technologies margins and reiterated a long-term 2030 margin target of 23% independently of market growth. Additional opportunities cited included the ramp-up of the high-performance plant, further productivity and waste reduction, and the introduction of new formulations such as Geo-Pad.
  • Flow Technologies Revenue and Margin GrowthFlow Technologies revenue grew 99% overall and 6% organically, led by pump projects and short-cycle valves. Valves revenue increased 20%, and Flow Technologies generated a 1.2 book-to-bill. Segment margin was 22.4%, improving 100 basis points sequentially as integration synergies accelerated.
  • Flow Technologies Pipeline and Regional GrowthManagement said the Flow Technologies opportunity funnel increased approximately 6% year-over-year in the quarter and continued to grow after increasing in Q1 and Q2. North America was identified as the strongest growth engine, with Latin America also performing well, including mining investment. Management said the legacy backlog is expected to finish the year higher than the prior year.
  • SPX FLOW Growth and Backlog ProgressSPX FLOW revenue grew 6% in the third quarter and 8% year-to-date, keeping the business on track for high single-digit full-year growth. Nutrition & Health grew 16% year-to-date due to a healthy backlog, while Waukesha Cherry-Burrell and mixers also contributed. SPX FLOW's year-to-date book-to-bill was 1.04x and backlog increased 7% versus the prior year.
  • SPX FLOW Cost Synergies Ahead of PlanThe company said its synergy pipeline is well above the original $80 million target. Against a Q3 target of $15 million in savings, ITT projected more than $20 million of savings by year-end, representing an annual run rate greater than $30 million. Corporate and business-unit G&A synergies have been executed, while supply-chain and procurement actions are underway and expected to deliver savings in year two.
  • SPX FLOW Operational and Commercial InitiativesITT is simplifying the Nutrition & Health organization to increase accountability, eliminate bureaucracy and accelerate decision-making. It is expanding mixer aftermarket penetration, pursuing productivity and VA/VE initiatives, localizing operations in Latin America and the Middle East, expanding Waukesha Cherry-Burrell in China and India, entering the industrial process market, and leveraging the Bornemann installed base in North America.
  • Customer Partnership with DanoneManagement described its partnership with Danone as exceptional, with teams working jointly on capital plans and specialized equipment intended to improve productivity, increase throughput and reduce energy consumption.
  • Investment in Industrial Pumps and LocalizationITT said it will invest in the Johnson Pumps business in India, which has successfully gained share in the Indian market and may support global expansion. Bran+Luebbe is localizing assembly and engineering in China and the Middle East, while European operations are being resized to align with regional demand.
  • Strong Cash Generation and DeleveragingITT generated $288 million of free cash flow in the third quarter and $464 million year-to-date, representing an 11% free cash flow margin. The company paid down more than $200 million of debt, reduced leverage to 2.3x and expects year-end leverage of approximately 2.1x. Excluding acquisition-related expenses from Q1, year-to-date free cash flow increased 46%.
  • Share Repurchases and Aerospace Contacts AcquisitionITT repurchased $50 million of shares in the third quarter and more than $150 million year-to-date. It also acquired Aerospace Contacts to strengthen the CCT supply chain and support future growth.
  • Capacity Expansion for CCT GrowthFollowing the Aerospace Contacts acquisition, ITT said it is evaluating new machines for high-volume, low-mix contacts and a new nearby shop floor. The company also invested in molding and machining equipment in Weinstadt, Germany, and in Nogales, Mexico, to support growth.
  • Updated 2026 GuidanceITT raised its 2026 organic revenue growth guidance to 7% to 9%. It expects adjusted operating margin expansion of over 100 basis points to approximately 20.6% at the midpoint, driven by top-line growth, favorable price-to-cost, productivity gains and accelerated synergy savings.
  • Raised EPS and Free Cash Flow OutlookThe company raised its 2026 adjusted EPS outlook to $8.58 at the midpoint, a $0.36 increase representing 19% year-over-year growth. SPX FLOW is now expected to contribute more than $0.20 to EPS. ITT also raised the midpoint of its free cash flow guidance to $610 million, representing an approximately 11% free cash flow margin.
  • Positive Outlook for 2027 and BeyondManagement said the healthy and growing backlog provides confidence entering the fourth quarter and 2027. It expects Motion Technologies to outperform the automotive market over the next two to three years, rail to continue growing, European defense to support KONI, and aerospace and defense to provide a tailwind for CCT.
  • Leadership Expansion for CCTDavide Barbon, currently president of Motion Technologies, will also lead Connect & Control Technologies. Management said CCT has the highest growth potential, largest margin expansion potential and significant continuous-improvement opportunity in the portfolio.
  • M&A Pipeline Remains ActiveManagement said ITT is cultivating acquisitions in CCT, particularly connectors serving aerospace and defense, and in Flow Technologies. The company may pursue bolt-on acquisitions over the next 12 months, while larger acquisitions are expected to follow further debt reduction and additional value creation from SPX FLOW.
  • Technology and Product Development OpportunitiesManagement said technological changes in braking have historically created opportunities for ITT to gain market share. New electronic brake technologies are beginning to appear in China, while Geo-Pad is expected to enter the market in the first quarter of 2028 and may support future platform wins and rewins.
  • Positive Price-to-Cost Position in Several BusinessesPrice-to-cost was described as positive in Flow Technologies and even more positive in CCT, with CCT expected to remain price-cost positive for the full year. In Motion Technologies, commodity and energy indexing in customer contracts provides compensation when costs rise, while productivity has supported continued margin improvement.

DE:2II Earnings History

DE:2II earnings history
Report DateFiscal QuarterForecast / EPSLast Year's EPSEPS YoY ChangePress Release
Feb 11, 20272026 (Q4)2.02-1.67――
Nov 04, 20262026 (Q3)1.872.041.626.97% (+0.43)
Aug 06, 20262026 (Q2)1.731.871.4826.83% (+0.40)
May 06, 20262026 (Q1)1.551.781.3136.55% (+0.48)
Feb 05, 20262025 (Q4)1.601.671.3523.33% (+0.32)
Oct 29, 20252025 (Q3)1.501.601.3221.92% (+0.29)
Jul 31, 20252025 (Q2)1.451.481.3410.07% (+0.14)
May 01, 20252025 (Q1)1.301.311.282.11% (+0.03)
Feb 06, 20252024 (Q4)1.331.351.2111.94% (+0.14)
Oct 29, 20242024 (Q3)1.291.321.236.57% (+0.08)

The table shows recent earnings report dates and whether the forecast was beat or missed. See the change in forecast and EPS from the previous year.

Beat Missed