Skip to main content
TipRanks
Go Ultimate75% OFF

Elmet Group Co. Class A (ELMT) Q3 2026 Earnings Report

91 Followers

ELMT Q3 2026 EPS Results

Actual EPS
$0.35
Consensus EPS
$0.17
Beat/Miss
Beat by +$0.18
One Year Ago EPS
―

ELMT Q3 2026 Revenue Results

Actual Revenue
$79.56M
Expected Revenue
$64.64M
Beat/Miss
Beat by +$14.92M
YoY Revenue Growth
―

Earnings Announcement Details

Quarter
Q3 2026
Date
11/09/2026
Time
After Close
Conference Call
Monday, November 9, 2026
ELMT Upcoming Earnings

Elmet Group Co. Class A's next earnings date is estimated for May 28, 2027, based on past reporting schedules.

Q3 2026 Earnings Call Audio

ELMT Q3 2026 Earnings Call
0:00 / 0:00

Q3 2026 Earnings Slide Deck

No slide deck is available for this earnings event.

Q3 2026 Earnings Call Summary

Q3 2026
Earnings Call Date:Nov 09, 2026|% Change Since:-7.50%|
Earnings Call Sentiment|Positive

The call was strongly positive, supported by 55.6% quarterly revenue growth, a 129.4% increase in adjusted EBITDA, expanded gross margins, a substantial backlog increase, improved liquidity and major Department of War and DLA agreements. Management also outlined significant investments in U.S. manufacturing, supply-chain integration, Nevada refining capacity and a European manufacturing footprint. The principal challenges were execution timing, dependence on mine ramps and appropriations, higher operating expenses, limited near-term DFARS and restocking effects, and expected temporary margin dilution from the German acquisition. Overall, the highlights significantly outweighed the lowlights.

Company Guidance

Management expects approximately $165 million of the Department of War investment to expand and modernize U.S. capacity, with equipment procurement, installment and modernization expected during 2027, expanded defense capacity coming online in the second half of 2028, and a full run rate targeted for 2031; elsewhere, the full run rate is targeted for 2030. ERT trading is expected to begin fulfilling the DLA contract in the first half of 2028, with the refining side and Springer APT facility restart targeted for the first half of 2029 or sooner, the whole business goal being fully operational in all areas by the end of 2031, and the DLA contract carrying a $2 billion ceiling value, $162 million initially funded, a 5-year base ordering period through August 2031 and a 2-year extension option through August 2033. Tungsten West is expected to provide more than 1,000 metric tons per year, with a 3 to 6 months lag from mine ramp to revenue, volume about 3 to 4x internal use, and at full scale at current pricing a couple of hundred million dollars of run rate, maybe a little bit more, potentially toward the end of 2027; 1/3 to maybe up to 1/2 could be consumed internally depending on the ramp rate of Schwabmünchen. Schwabmünchen is expected to close during the first quarter of 2027, is expected to be somewhat dilutive to margins for a period of time, and management thinks it can get that cash flow positive by year 3. Molybdenum pricing changes would likely flow through the P&L 90 days or so to 120 days later, while tungsten can take up to 9 months, with the Q1 price spike reaching $3,000 per MTU still having a little bit of room to flow through.

  • Strong Q3 Revenue GrowthQ3 2026 revenue increased 55.6% to $79.6 million from $51.1 million in Q3 2025. Approximately 70% of the growth reflected higher tungsten and molybdenum raw material prices, while 30% was driven by increased demand across aerospace, defense, government, industrial, medical and semiconductor end markets. Excluding significant material price increases, aggregate shipments grew around 15%.
  • Significant Profitability ImprovementGross profit increased 124.1% to $24.9 million, with gross margin expanding to 31.3% from 21.7%. Adjusted EBITDA increased approximately 130% to $17.0 million from $7.4 million. Management attributed the margin improvement to tungsten pricing and its management, strategic sourcing agreements, productivity gains and operational performance improvements within CMC.
  • Positive Net Income and Adjusted Earnings GrowthQ3 2026 net income was $8.3 million, or $0.24 per diluted share, compared with $1.6 million, or $0.08 per diluted share, in Q3 2025. Adjusted net income was $11.4 million, or $0.35 per diluted share, compared with $4.7 million, or $0.23 per diluted share.
  • Improved Trailing-Twelve-Month PerformanceFor the trailing twelve months ended October 2, 2026, revenue increased 12.4% to $257.0 million, gross profit increased 27.2% to $64.5 million, and gross margin increased to 25.1% from 22.2%. Net income was $5.0 million, or $0.17 per diluted share, compared with a net loss of $1.7 million, or $0.08 per diluted share. Adjusted net income increased to $22.7 million from $16.0 million, while adjusted EBITDA increased 33.6% to $38.1 million, or 14.8% of revenue, from $28.5 million, or 12.5% of revenue.
  • Record Firm Order BacklogFirm order backlog grew to approximately $347.4 million at the end of Q3 2026, compared with $131.5 million at the end of Q2 2026 and $87.3 million at the end of Q3 2025. The pre-existing CMC and EMP divisions contributed $98.1 million of year-over-year backlog growth, driven by ADG customers, a separate DLA award for molybdenum products, and programs including CERN, Strategic Missile Systems, PrSM, Standard Missile, Patriot and Next Gen Interceptor.
  • Department of War InvestmentThe Department of War committed $450 million to expand Elmet's U.S. tungsten processing and manufacturing capabilities, including an initial $200 million draw at closing. The investment is structured through redeemable preferred equity and warrants representing up to 19.9% of Elmet's common stock on a post-exercise basis, along with one independent board seat and one board observer.
  • U.S. Manufacturing Capacity ExpansionApproximately $165 million of the Department of War investment is anticipated to expand and modernize Elmet's manufacturing capacity across Maine, Michigan and Ohio. Equipment procurement, installation and modernization are expected during 2027, expanded defense capacity is expected to begin coming online in the second half of 2028, and the full run rate across upgraded facilities is targeted for 2030 in the later timeline discussion.
  • Expanded Tungsten Supply InvestmentsElmet invested $100 million of Department of War funds and approximately $25 million of its own cash in Masan, described as one of the world's largest integrated tungsten producers and the only operating independent APT processor outside of China. Elmet also signed a long-term offtake agreement with Tungsten West securing more than 1,000 tons per year of tungsten concentrate.
  • Large DLA Framework AgreementElmet established a new DLA framework with a ceiling value of $2 billion, including initially funded purchase orders of $162 million, or $161.9 million as reflected in backlog. The agreement covers tungsten concentrate and sodium tungstate, has a five-year base ordering period through August 2031, and includes a two-year extension option through August 2033.
  • Creation of Elmet Refining & TradingElmet established the Elmet Refining & Trading division to coordinate sourcing, refining, trading and delivery across its tungsten and molybdenum supply chain. The trading business is expected to begin fulfilling the DLA contract in the first half of 2028, subject to mine ramps, while the refining side and Springer APT facility restart are targeted for the first half of 2029 or sooner, subject to customary closing conditions.
  • Nevada Springer Tungsten Complex InvestmentElmet intends to allocate approximately $150 million to the Blue Moon Springer Tungsten Complex in Nevada through a $25 million equity investment, a $50 million secured funding facility and an Elmet-controlled joint venture with Blue Moon Metals and EQ Resources. The company said approximately 40 tons of tungsten potentially received in 2027 would likely come from the mine's tailings pile.
  • Planned German Manufacturing FootprintElmet announced the planned acquisition of ams OSRAM's metal production operations in Schwabmünchen, Germany, expected to close during the first quarter of 2027. The facility would establish Elmet's first refractory metals manufacturing footprint in Europe and expand capabilities across powders, rods, wires, electrodes and machined components. Management said Germany's foreign direct investment approval had been received and described the facility as Europe's only fully integrated tungsten producer and one of the few European facilities capable of producing pure tungsten powders.
  • Broadening Microwave and Defense DemandManagement reported that Raytheon's Patriot business is beginning to increase for EMP and that demand for Echodyne anti-drone defense is increasing rapidly. The company also said it continues to evaluate strategic bolt-on acquisitions for the microwave division and maintains an M&A pipeline.
  • Strategic Supply Chain PositioningMore than 97% of Elmet's tungsten and molybdenum is sourced outside of China. Management said the company now spans mining and raw material supply, APT refining, powder processing, thermomechanical processing, machining, fabrication and quality control, with the objective of supporting a mine-to-missile platform.
  • Strong Liquidity After Department of War FundingCash was $105.7 million as of Q3 2026, with an additional $124.7 million of restricted cash, compared with $1.8 million of cash as of December 31, 2025. The increase was driven by $200 million in proceeds from the issuance of Class A redeemable preferred stock to the Department of War.

ELMT Earnings History

ELMT earnings history
Report DateFiscal QuarterForecast / EPSLast Year's EPSEPS YoY ChangePress Release
May 28, 20272027 (Q1)―-0.23――
Nov 09, 20262026 (Q3)0.170.35――
Aug 13, 20262026 (Q2)0.060.180.04339.02% (+0.14)
May 29, 20262026 (Q1)-0.010.230.04475.00% (+0.19)

The table shows recent earnings report dates and whether the forecast was beat or missed. See the change in forecast and EPS from the previous year.

Beat Missed