Cooper Co (CP60) Risk Analysis

The ACA made extensive changes to the delivery of health care in the United States. Among the provisions of the ACA, of greatest importance to the medical device industry and pharmaceutical industry are the following: - Establishment of the Patient-Centered Outcomes Research Institute to oversee, identify priorities in, and conduct comparative clinical effectiveness research, along with funding for such research;- Payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain health care services through bundled payment models;- Establishment of a Center for Medicare & Medicaid Innovation at CMS to test innovative payment and service delivery models to lower Medicare and Medicaid spending; and - An increase in the statutory minimum rebates a manufacturer must pay under the Medicaid Drug Rebate Program to 23.1% and 13% of the average manufacturer price for most branded and generic drugs, respectively. These measures could result in decreased net revenues or increased expenses from our fertility, office and surgical portfolios and decrease potential returns from our development efforts. Other legislative changes which impact the medical device and pharmaceutical industry have been proposed and adopted since the ACA was enacted, including, the Budget Control Act of 2011, which, among other things, included aggregate reductions to Medicare payments to providers and the Medicare Access and CHIP Reauthorization Act of 2015, which, among other things, replaced and changed the formula by which Medicare made annual payment adjustments to physicians and the American Rescue Plan Act of 2021, which eliminated the statutory Medicaid drug rebate cap. In foreign countries where we market our products, recent healthcare reform has taken place as well. For instance, in December 2021, the EU Regulation No 2021/2282 on Health Technology Assessment (HTA) amending Directive 2011/24/EU was adopted. This Regulation intends to boost cooperation among EU member states in assessing health technologies, including certain high-risk medical devices, and provide the basis for cooperation at the EU level for joint clinical assessments in these areas. It will permit EU member states to use common HTA tools, methodologies, and procedures across the EU, working together in four main areas, including joint clinical assessment of the innovative health technologies with the highest potential impact for patients, joint scientific consultations whereby developers can seek advice from HTA authorities, identification of emerging health technologies to identify promising technologies early, and continuing voluntary cooperation in other areas. Individual EU member states will continue to be responsible for assessing non-clinical (e.g., economic, social, ethical) aspects of health technologies, and making decisions on pricing and reimbursement. We expect that additional state, federal and foreign health care reform measures will be adopted in the future, including those initiatives affecting coverage and reimbursement for our products, any of which could limit the amounts that federal state and foreign governments will pay for health care products and services, which could adversely affect the growth of the market for our products or demand for our products, or result in additional pricing pressures. Also, any adoption of health care reform proposals on a state-by-state basis could require us to develop state-specific marketing and sales approaches. We cannot predict the effect such reforms or the prospect of their enactment may have on our business. In addition, third-party payors, whether governmental or commercial, whether inside the United States or abroad, increasingly attempt to contain or reduce the costs of health care. These cost-control methods include prospective payment systems, capitated rates, group purchasing, redesign of benefits, requiring pre-authorizations or second opinions prior to certain medical procedures, encouragement of healthier lifestyles and exploration of more cost-effective methods of delivering health care. Although cost controls or other requirements imposed by third-party payors have not historically had a significant effect on contact lens prices or distribution practices, this could change in the future and could adversely affect our business. We may enroll as in-network providers and suppliers with certain payors. Although, becoming an in-network provider or enrolling as a supplier means that we have agreed with these payors to provide certain of our tests at negotiated rates, it does not obligate any physicians to order our tests or guarantee that we will receive reimbursement for our tests from these or any other payors at adequate levels. Thus, these payor relationships, or any similar relationships we may establish in the future, may not result in acceptable levels of reimbursement for our tests or meaningful increases in our physician customer base. We cannot predict whether, under what circumstances, or at what payment levels payors will cover and reimburse for our tests. If we fail to establish and maintain broad coverage and reimbursement for our tests, our ability to generate increased revenue and grow our test volume and customer base could be limited and our future prospects and our business could suffer.

We may be subject to various federal, state and foreign laws pertaining to health care fraud and abuse, including anti-kickback, physician self-referral false claims and physician payment transparency laws and regulations. These laws may constrain the business or financial arrangements and relationships through which we conduct our operations, including our commercial laboratory operations and how we research, market, sell and distribute any products for which we obtain marketing approval. Such laws include: - the federal Anti-Kickback Statute, which prohibits, among other things, persons or entities from knowingly and willfully soliciting, offering, receiving or providing any remuneration (including any kickback, bribe or certain rebates), directly or indirectly, overtly or covertly, in cash or in kind, in return for, either the referral of an individual or the purchase, lease, or order, or arranging for or recommending the purchase, lease, or order of any good, facility, item or service, for which payment may be made, in whole or in part, under a federal healthcare program such as Medicare and Medicaid. A person or entity does not need to have actual knowledge of the federal Anti-Kickback Statute or specific intent to violate it in order to have committed a violation;- the federal physician self-referral prohibitions, commonly known as the Stark Law, which generally prohibit entities from billing a patient or the Medicare or Medicaid programs for certain designated health services, including clinical laboratory services, when the physician ordering the service, or any member of such physician's immediate family, has a financial interest, such as an ownership or investment interest in or compensation arrangement with us, unless the arrangement meets an exception to the prohibition. These prohibitions apply regardless of any intent by the parties to induce or reward referrals or the reasons for the financial relationship and the referral;- the federal false claims laws, including the civil False Claims Act, and civil monetary penalties laws, which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, to the federal government, claims for payment or approval that are false or fraudulent, or knowingly making, using or causing to be made or used, a false record or statement material to a false or fraudulent claim, or knowingly making or causing to be made a false statement to avoid, decrease or conceal an obligation to pay money to the federal government. In addition, the government may assert that a claim including items or services resulting from a violation of the federal Anti-Kickback Statute or Stark Law constitutes a false or fraudulent claim for purposes of the civil False Claims Act;- the federal Civil Monetary Penalties Law, which, among other things, authorizes the imposition of civil monetary penalties, assessments, and exclusion against an individual or entity based on a variety of prohibited conduct, including, but not limited to, offering remuneration to a federal healthcare program beneficiary that the individual or entity knows or should know is likely to influence the beneficiary to order or receive healthcare items or services from a particular provider;- the federal Health Insurance Portability and Accountability Act of 1996, which imposes criminal and civil liability for, among other things, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, or knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false statement, in connection with the delivery of, or payment for, healthcare benefits, items or services. Similar to the federal Anti-Kickback Statute, a person or entity does not need to have actual knowledge of the statute or specific intent to violate it in order to have committed a violation;- the federal Physician Payments Sunshine Act, which requires certain manufacturers of drugs, devices, biologics and medical supplies for which payment is available under Medicare, Medicaid or the Children's Health Insurance Program (with certain exceptions) to report annually to the CMS, information related to payments and other "transfers of value" made to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors), certain non-physician practitioners including physician assistants and nurse practitioners, and teaching hospitals, as well as ownership and investment interests held by physicians and their immediate family members; and - analogous state and foreign laws and regulations, such as state anti-kickback and false claims laws, which may apply to sales or marketing arrangements and claims involving healthcare items or services reimbursed by non-governmental third-party payors, including private insurers and self-pay patients; some state laws that require biotechnology companies to comply with the industry's voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government and may require drug and device manufacturers to report information related to payments and other transfers of value to physicians and other healthcare providers or marketing expenditures; some state laws that require biotechnology companies to report information on the pricing of certain drug products; and some state and local laws that require the registration of sales representatives. In addition, federal government price reporting laws, among other things, require us to calculate and report complex pricing metrics to government programs, where such reported prices may be used in the calculation of reimbursement and/or discounts on our marketed drugs. Participation in these programs and compliance with the applicable requirements may subject us to potentially significant discounts on our products, increased infrastructure costs and potentially limit our ability to offer certain marketplace discounts. Violations of these laws are punishable by criminal and civil sanctions, including, in some instances, exclusion from participation in federal and state health care programs, including Medicare, Medicaid, Veterans Administration health programs and TRICARE. Similarly, if the physicians or other providers or entities with whom we do business are found to be non-compliant with applicable laws, they may be subject to sanctions, which could indirectly have a negative impact on our business, financial condition and results of operations. Because of the complex and far-reaching nature of these laws, we cannot be assured that we would not be required to alter one or more of our practices to be in compliance with these laws. Any violations of these laws or regulations could result in a material adverse effect on our business, financial condition and results of operations. In addition, changes in these laws, regulations, or administrative or judicial interpretations, may require us to further change our business practices or subject our existing business practices to legal challenges, which could have a material adverse effect on our business.

Our manufacturing operations and processes are required to comply with numerous federal, state and foreign regulatory requirements, including the FDA's cGMP regulations for drugs and QSR for medical devices, which govern the procedures related to the design, testing, production processes, controls, quality assurance, labeling, packaging, storage, importing, exporting and shipping of our products. We also are subject to state requirements and licenses applicable to manufacturers of drugs and medical devices. In addition, we must engage in extensive recordkeeping and reporting and must make available our manufacturing facilities and records for periodic unscheduled inspections by governmental agencies, including the FDA, state authorities and comparable agencies (as well as audits by notified bodies) in other countries. Failure to comply with cGMP, QSR and other applicable domestic or international regulatory requirements or to respond to any adverse inspectional observations or product safety issues could result in disruption of our operations and manufacturing delays in addition to, among other things, warning letters, significant fines, injunctions, suspension of approvals, seizures, recalls or import holds of products, operating restrictions and criminal prosecutions. As a result, any failure to comply with applicable requirements could adversely affect our product sales and profitability. On January 31, 2024, the FDA issued a final rule to amend the QSR regulations to align more closely with the International Organization for Standardization standards. Accordingly, this could impose additional or different regulatory requirements on CooperVision and CooperSurgical that could increase the costs of compliance or otherwise create competition that may negatively affect our business. The manufacture of drug-device combination products, such as Paragard, is complex and requires significant expertise and capital investment. We and our contract manufacturers must comply with applicable cGMP, QSR and similar foreign regulations and guidelines. Manufacturers of pharmaceutical therapeutics often encounter difficulties in production, including difficulties with production costs and yields, quality control, quality assurance testing, operator error, shortages of qualified personnel, as well as compliance with strictly enforced federal, state and foreign regulations. Furthermore, if microbial, viral or other contamination are discovered in our drug products or in the manufacturing facilities in which our drug products are made, such manufacturing facilities may need to be closed for an extended period of time to investigate and remedy the contamination. We cannot be assured that any stability or other issues relating to the manufacture of any of our drug products will not occur in the future. Additionally, our manufacturers may experience manufacturing difficulties due to resource constraints or as a result of labor disputes or unstable political environments. If our manufacturers were to encounter any of these difficulties, or otherwise fail to comply with their contractual obligations, our ability to continue marketing our drug products would be jeopardized. Any adverse developments affecting manufacturing of our products may result in shipment delays, inventory shortages, lot failures, product withdrawals or recalls, or other interruptions in the supply of our products. We may also have to take inventory write-offs and incur other charges and expenses for products that fail to meet specifications, undertake costly remediation efforts or seek more costly manufacturing alternatives. Accordingly, failures or difficulties faced at any level of our supply chain could materially adversely affect our business and delay or impede the commercialization and marketing of any of our products and could have a material adverse effect on our business.

Our products and operations are subject to rigorous regulation by the FDA, and numerous other federal, state and foreign governmental authorities. In the United States, the FDA regulates virtually all aspects of medical device and pharmaceutical design, development, testing, manufacture, safety, labeling (including, for example, unique device identifier regulations), storage, recordkeeping, reporting, marketing, promotion, advertising and distribution, as well as product import and export. Our failure to comply with FDA regulations could lead to the imposition of administrative or judicial sanctions, including injunctions, fines, warning letters, suspensions or the loss of regulatory clearances or approvals, product recalls, termination of distribution or product seizures. In the most egregious cases, criminal sanctions or closure of our manufacturing facilities are possible. Our medical devices and pharmaceutical products require clearance or approval by the FDA before they can be commercially distributed in the United States and may require similar approvals by foreign regulatory agencies before distribution in foreign jurisdictions. Medical devices and drug products may only be marketed for the indications for which they are approved or cleared. The process of obtaining, renewing and maintaining regulatory clearances and approvals to market product, particularly from the FDA, can be costly and time consuming. We cannot be assured that such clearances and approvals will be granted on a timely basis, if at all, and significant delays in the introduction of any new products or product enhancements may occur, which could adversely affect our competitive position and results of operations. In addition, the FDA and authorities in foreign jurisdictions may change their policies, adopt additional regulations or revise existing regulations, each of which could prevent or delay premarket approval or clearance of our products, increase the cost of compliance, impose additional regulatory requirements on us, or otherwise impact our ability to market our currently approved or cleared products. Modifications and enhancements to medical devices require a new FDA clearance or approval if they could significantly affect its safety or effectiveness or would constitute a major change in its intended use, design or manufacture. The FDA requires every medical device manufacturer to make this determination in the first instance, but the FDA may review any manufacturer's decision. We have made modifications and enhancements to our medical devices that we do not believe require a new clearance or approval, but we cannot confirm that the FDA will agree with our decisions. If the FDA requires us to seek clearance or approval for a modification of a previously cleared product for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties, which could have a material adverse effect on our financial results and competitive position. We also cannot assure that we will be successful in obtaining clearances or approvals for our modifications, if required. Our efforts to promote some of our products and services via direct-to-consumer marketing initiatives may subject us to additional scrutiny by the FDA, FTC or other agencies. For example, we promote PARAGARD and cord blood and cord tissue storage directly to end consumers. Regulatory agencies may further scrutinize our practices with respect to effective communication of risk information, benefits or claims with respect to such products. Any failure to comply with ongoing regulatory requirements may significantly and adversely affect our ability to commercialize and generate revenue from our products and product candidates. If regulatory sanctions are applied or if regulatory approval is withdrawn, the value of our Company and our operating results may be adversely affected. The FDA's and other regulatory authorities' policies may change and additional government regulations may be enacted that could prevent, limit or delay regulatory approval of our product candidates. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may be subject to enforcement action and we may not achieve or sustain profitability, which would adversely affect our business. We also cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative or executive action, either in the United States or abroad. Subject to transitional provisions and in order to sell our products in the EU, our products must respectively comply with general safety and performance requirements of the EU MDR and the EU IVDR. Compliance with these requirements is a prerequisite to be able to affix the European Conformity (CE) mark to our products, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in the Annexes to the EU MDR and EU IVDR including that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and, where applicable, other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To demonstrate compliance with the general safety and performance requirements we must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. Except for low-risk medical devices (Class I) or general IVDs (Class A), where the manufacturer can self-assess the conformity of its products with the general safety and performance requirements (except for any parts which relate to sterility, metrology or reuse aspects of a medical device), a conformity assessment procedure requires the intervention of a notified body. Notified bodies are independent organizations designated by EU member states to assess the conformity of devices before being placed on the market. A notified body would typically audit and examine a product's technical dossiers and the manufacturer's quality system (notified body must presume that quality systems which implement the relevant harmonized standards-ISO 13485:2016 for Quality Management Systems-conform to these requirements). If satisfied that the relevant product conforms to the general safety and performance requirements, the notified body issues a CE certificate, which the manufacturer uses as a basis for its declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU. If we fail to remain in compliance with applicable EU laws, directives or regulations, we would be unable to continue to affix the CE mark to our products, which would prevent us from selling them within the EU and EEA. In the EU, regulatory authorities have the power to carry out announced and, if necessary, unannounced inspections of companies, as well as suppliers and/or sub-contractors and, where necessary, the facilities of professional users. Failure to comply with regulatory requirements (as applicable) could require time and resources to respond to the regulatory authorities' observations and to implement corrective and preventive actions, as appropriate. Regulatory authorities have broad compliance and enforcement powers and if such issues cannot be resolved to their satisfaction can take a variety of actions, including untitled or warning letters, fines, consent decrees, injunctions, or civil or criminal penalties. The EU regulatory landscape concerning medical devices (including IVDs) is continuously evolving and the new requirements may have a significant effect on the way we conduct our business in the EU and the EEA. Following Brexit, the UK regulatory landscape concerning medical devices (including IVDs) is evolving and may have a significant effect on the way we conduct our business in the UK. See Risk Factors – "Legislative or regulatory reforms in the United States or Europe may make it more difficult and costly for us to obtain regulatory clearances, approvals or certifications for our products or to manufacture, market or distribute our products after clearance or approval is obtained".

In many of the foreign countries in which we market our products, we are subject to regulations affecting, among other things, product standards, packaging requirements, labeling requirements, import restrictions, tariff regulations, the reporting of certain payments to health care practitioners in certain markets (for example, the French anti-gift legislation), duties and tax requirements. Many of the regulations applicable to our devices and products in such countries are similar to those of the FDA. The advertising and promotion of medical devices is subject to some general principles set forth in the EU legislation. Directive 2006/114/EC concerning misleading and comparative advertising and Directive 2005/29/EC on unfair commercial practices, while not specific to the advertising of medical devices, apply to the advertising thereof and contain general rules, for example, requiring that advertisements be evidenced, balanced and not misleading. Specific requirements are defined at a national level. EU member states' laws related to the advertising and promotion of medical devices, which vary between jurisdictions, may limit or restrict the advertising and promotion of products to the general public and may impose limitations on promotional activities with healthcare professionals. In many countries, the national health or social security organizations require our products to be qualified before they can be marketed with the benefit of reimbursement eligibility. To date, we have not experienced difficulty in complying with these regulations. However, our failure to receive, or delays in the receipt of, relevant foreign qualifications could have a material adverse effect on our business, financial condition and results of operations.

In the United States, in vitro diagnostic devices (IVDs) are a type of medical device that can be used in the diagnosis or detection of diseases or other conditions. The FDA considers laboratory developed tests (LDTs) to be a subset of IVDs that are designed, manufactured, and used within a single laboratory. Similar tests are also known as In-House Tests (IH-Tests) in the EU and LDTs have historically been subject to enforcement discretion by the FDA and were not previously regulated under the 98/79EC in-vitro diagnostic directive (IVDD) of the EU. We offer certain genetic testing services to help identify the likelihood of pregnancy as well as identify possible disorders or diseases of a child prior to birth, and we have historically marketed these tests as LDTs in the United States. As a result, our tests may be subject to the FDA's enforcement of its medical device regulations and the applicable FDCA provisions. On May 6, 2024, the FDA published a final rule on the regulation LDTs, making explicit that LDTs are medical devices under the FDCA. Although since then the FDA has rescinded its prior rule regulating LDTs as medical devices, it is unclear whether the FDA may seek greater oversight of LDTs in other ways, which could increase costs and expenses or otherwise negatively affect our business. Similarly, in the EU, the regulatory landscape has evolved to include the definition of an IH-Test as is an IVD that is developed and produced by a laboratory on a non-industrial scale and is provided to health institutions in accordance with Article 5 of the EU IVDR. Under such circumstances, many IH-Tests may continue to be exempt from regulation indefinitely or until 2030 in circumstances where commercially available CE marked options exist. Our genetic tests may be subject to the full application of the EU IVDR with respect to some or all of our existing, as well as future, tests if our tests do not qualify for an IH-Test exemption. We may be required to expend additional time and resources to comply with the requirements of the EU IVDR, resulting in additional expenses for offering our current and any future tests as well as possibly delaying or suspending development or commercialization of such tests. We expect that new proposals or legislative changes may be introduced from time to time both in the U.S. and in foreign countries. Any new FDA enforcement policies affecting LDTs or regulations such as the EU IVDR is likely to result in increased regulatory burden on our ability to continue marketing our genetic products and to develop and introduce new products in the future, which could adversely affect our business.

We are subject to the CLIA, a federal law regulating clinical laboratories that perform testing on specimens derived from humans for the purpose of providing information for the diagnosis, prevention or treatment of disease. Our clinical laboratories must be certified under CLIA and ISO 15189 in order for us to perform testing on human specimens. In addition, our proprietary tests must also be recognized as part of our accredited programs under CLIA so that we can offer them in our laboratory. CLIA is intended to ensure the quality and reliability of clinical laboratories in the United States by mandating specific standards in the areas of personnel qualifications, administration, and participation in proficiency testing, patient test management, quality control, quality assurance and inspections. The law also requires us to maintain a state laboratory license to conduct testing in that state. In addition, we are subject to the UK Human Fertilization & Embryology Association (HFEA) regulating IVF. Our laboratories are located in Japan, the United Kingdom and United States, and we must maintain the requisite licenses in each jurisdiction. Any sanction imposed under CLIA, its implementing regulations, or state or foreign laws or regulations governing licensure, or our failure to renew a CLIA certificate, or a state or foreign license or accreditation, could have a material and adverse effect on our diagnostic testing business, operating results and financial condition. Three federal agencies are responsible for administering the CLIA program in the United States: the CMS, the Centers for Disease Control and Prevention (CDC), and the FDA. The CMS in particular has the authority to impose a wide range of sanctions, including revocation of CLIA certification along with a bar on the ownership or operation of a CLIA-certified laboratory by any owners or operators of the deficient laboratory. If we were to lose our CLIA certification or required state or foreign licensure, we would not be able to operate our clinical laboratory and conduct our tests, worldwide or in particular jurisdictions, which would adversely impact our diagnostic testing business, operating results, and financial condition.