Columbus Mckinnon (CMCO) Risk Analysis

Our business exposes us to possible claims for personal injury or death, property damage or economic loss resulting from the products that we sell and to potential warranty, contractual or other claims. These product liability risks are inherent in the design, manufacture and sale of our products. Our products are complex and may contain defects, errors, or experience failures or unsatisfactory performance, due to any number of issues, including issues in materials, design, fabrication, packaging and/or use within a system or item of equipment. Further, because of the complexity of our products, defects or errors might only be detected when the products are in use. As a result, we could experience material product liability or warranty costs in the future and incur significant costs to defend ourselves against associated claims. Development of new products increases complexity and adds risk to manufacturing reliability, and increases the likelihood of product defects or errors. In addition, defects in our products could result in failure to achieve market acceptance, a shifting of business to our competitors, and litigation or regulatory action against us, and could harm our reputation or the reputation of the various brands under which we sell our products, our relationships with customers and our ability to attract new customers, as well as the perceptions of our brands. Other potential adverse impacts of product defects include shipment delays, write-offs of property, plant and equipment and intangible assets, and losses on unfavorable purchase commitments. We maintain insurance through a combination of self-insurance retentions and excess insurance coverage. We monitor claims and potential claims of which we become aware and establish accrued liability reserves for the self-insurance amounts based on our liability estimates for such claims. We cannot give any assurance that existing or future claims will not exceed our estimates for self-insurance or the amount of our excess insurance coverage. In addition, we cannot give any assurance that insurance will continue to be available to us on economically reasonable terms or that our insurers would not require us to increase our self-insurance amounts. Claims brought against us that are not covered by insurance or that are in excess of insurance coverage could have a material adverse effect on our results, financial condition, or liquidity. In addition, warranty and certain other claims are not typically covered by insurance. In addition, like many industrial manufacturers, we are also involved in asbestos-related litigation. In continually evaluating costs relating to our estimated asbestos-related liability, we review, among other things, the incidence of past and recent claims, the historical case dismissal rate, the mix of the claimed illnesses and occupations of the plaintiffs, our recent and historical resolution of the cases, the number of cases pending against us, the status and results of broad-based settlement discussions, and the number of years such activity might continue. Based on this review, we estimate our share of liability to defend and resolve probable asbestos related personal injury claims. This estimate is highly uncertain due to the limitations of the available data and the difficulty of forecasting with any certainty the numerous variables that can affect the range of the liability. We continue to study the variables in light of additional information in order to identify trends that may become evident and to assess their impact on the range of liability that is probable and estimable. We believe that the potential additional costs for claims will not have a material effect on the financial condition of the Company or its liquidity, although the effect of any future liabilities recorded could be material to earnings in a future period. See Note 16 to our March 31, 2026 consolidated financial statements included in Item 8, Financial Statements and Supplementary Data, of this Form 10-K. As indicated above, our self-insurance coverage is provided through our captive insurance subsidiary. The reserves of our captive insurance subsidiary are subject to periodic adjustments based upon actuarial evaluations, which adjustments impact our overall results of operations and financial condition. These periodic adjustments can be favorable or unfavorable.

The primary raw materials used in our chain, forging and crane building operations are steel, aluminum, and other raw materials such as motors, electrical and electronic components, castings and machined parts and components. The industries that produce these critical components and materials are also themselves highly cyclical and at times pricing and availability can be volatile due to a number of factors beyond our control, including general macroeconomic conditions, inflation, labor costs, competition, import duties, quotas, tariffs, trade regulations and agreements, and currency exchange rates. This volatility can significantly affect our raw material costs. The United States has maintained tariffs on certain imported steel, aluminum and items originating from China, which have increased the cost of raw materials we purchase. The imposition of tariffs by the United States has resulted in retaliatory tariffs from a number of countries, including China, which also increase the cost of raw materials we purchase. Substantial legal and regulatory uncertainty exists regarding international trade relations and trade policy. Global trade policy continues to evolve and the ultimate impact of recent developments with respect to U.S. tariffs is unclear. Throughout 2025, the U.S. government implemented multiple new tariff measures under various authorities, including the International Emergency Economic Powers Act ("IEEPA"), many of which were announced, modified, suspended, or reinstated with limited notice. These 2025 U.S. tariff actions included broad "reciprocal" tariff measures affecting imports from most countries and new tariffs targeting the industries in which we operate. On February 20, 2026, the U.S. Supreme Court issued a ruling striking down certain tariffs previously imposed under the IEEPA. Following the U.S. Supreme Court's decision, the U.S. presidential administration announced its intention to invoke other laws to collect tariffs and announced new tariffs on imports from all countries, in addition to any existing non-IEEPA tariffs. There remains substantial uncertainty regarding the duration of existing and newly announced tariffs, potential changes or pauses to such tariffs, tariff levels, and whether further additional tariffs or other retaliatory actions may be imposed, modified, or suspended, and the impacts of such actions on our business. An introduction of new duties, tariffs, quotas or other similar trade restrictions, or increases in existing duties or tariff rates, on products imported into the United States and other jurisdictions, whether actual, pending or threatened, may have a negative impact on our results of operations. Significant uncertainty exists as to whether and when tariffs may be reduced or imposed, and what countries may be implicated. Given that we cannot reasonably predict the timing or outcomes of trade actions by the U.S. government or other countries, the impact of such actions on our business and results of operations remains uncertain. Any escalation of trade tensions, additional tariffs, retaliatory measures by foreign governments or shifts in U.S. or international trade policies could adversely impact our supply chain, increase our costs for raw materials, including significantly, or reduce demand for our products. A trade war or other significant changes in trade regulations could have a material adverse effect on our business, financial condition, results of operations and cash flows. In an environment of increasing raw material prices and trade tariffs, duties and quotas, competitive conditions will determine how much of the price increases we can pass on to our customers. In the future, to the extent we are unable to pass on any steel, aluminum, or other raw material price increases to our customers, our profitability and margins could be adversely affected, including materially.

Our ability to match new product offerings to diverse global customers' anticipated preferences for different types and sizes of equipment and various equipment features and functionality, at affordable prices, is critical to our success. This requires a thorough understanding of our existing and potential customers on a global basis. Failure to deliver quality products that meet customer needs at competitive prices ahead of competitors could have a significant adverse effect on our business.

Our future success depends in part on our ability to prevent others from infringing on our proprietary rights, as well as our ability to operate without infringing upon the proprietary rights of others. Our efforts to protect our intellectual property through patents, trademarks, service marks, domain names, copyrights, trade secrets and confidentiality agreements may not adequately protect us against infringements, and pending patent or trademark applications may not result in issued patents or trademarks. Our patents, registered trademarks and patent applications, if any, may not be upheld if challenged, and competitors may develop similar or superior methods or products outside the protection of our patents. This could reduce demand for our products, reduce our market share and materially decrease our revenues. We may need to spend significant resources monitoring and enforcing our intellectual property rights and we may not be aware of or able to detect or prove infringement by third parties. We may be required at times to take legal action to protect our proprietary rights and, despite our best efforts, we may be sued for infringing on the intellectual property rights of others. Intellectual property-related litigation is costly and, even if we prevail, the cost of such litigation could adversely affect our financial condition. The protection and enforceability of our intellectual property rights is also subject to uncertainty in certain countries where we operate that have less rigorous intellectual property protection laws than the U.S. In addition, we could be adversely affected financially should we be judged to have infringed upon the intellectual property of others, and we could be required to modify the design of our products, change the name of our products or obtain a license for the use of some of the technologies used in our products.

The principal markets that we serve within the material handling and precision conveyance industries are fragmented and highly competitive. Competition is based primarily on customer service and support as well as product availability, performance, functionality, brand reputation, reliability, and price. Our competition in the markets in which we participate comes from companies of various sizes, some of which have greater financial and other resources than we do. Increased competition could force us to lower our prices or to offer additional services at a higher cost to us, which could reduce our gross margins and net income. The greater financial resources or the lower amount of debt of certain of our competitors may enable them to commit larger amounts of capital in response to changing market conditions. Certain competitors may also have the ability to develop product or service innovations that could put us at a disadvantage. In addition to the general competitive challenges we face, tariffs and other international trade policies could negatively affect the demand for our products and services and reduce our competitive position in such markets. In addition, through consolidation, some of our competitors have achieved substantially greater market penetration in certain of the markets in which we operate than we have been able to achieve. If we are unable to compete successfully against other manufacturers of material handling equipment and precision conveyors, we could lose customers and our revenues may decline. There can also be no assurance that customers will continue to regard our products favorably, that we will be able to develop new products or product developments that appeal to customers, that we will be able to improve or maintain our profit margins on sales to our customers or that we will be able to continue to compete successfully in our core markets.

We have operations and assets located outside of the U.S., primarily in Germany, Japan, the United Kingdom, Australia, Hungary, China, Malaysia and Mexico, including our new facility in Monterrey, Mexico. In addition, we import a portion of our hoist product line from Asia and sell our products to distributors located in approximately 50 countries. In our fiscal year ended March 31, 2026, approximately 44% of our net sales were derived from non-U.S. markets. These non-U.S. operations are subject to a number of special risks, in addition to the risks of our U.S. business, including but not limited to differing protections of intellectual property, trade barriers, labor unrest, geopolitical conflicts, exchange controls, regional economic uncertainty, differing (and possibly more stringent) labor regulation, risk of governmental expropriation, U.S. and foreign customs, quotas and duties, and tariffs (in particular, the tariffs implemented and additional tariffs proposed to be implemented on goods imported into the U.S. from Mexico and other countries where we have manufacturing operations and ongoing uncertainty in the interpretation of new tariffs and their applicability), political and economic instability in the jurisdictions in which we operate, foreign receivables collection risk, current and changing regulatory environments, difficulty in obtaining distribution support, difficulty in staffing and managing widespread operations, differences in the availability, and terms of financing, political instability and risks of increases in taxes. In particular, in connection with our Mexican manufacturing operations, as a result of the tariffs or other trade restrictions implemented or proposed to be implemented by the U.S. or other countries, the cost of our products manufactured in Mexico or other countries and imported into the U.S. or other countries have increased and could continue to increase further, which, in turn, has adversely affected, and could continue to adversely affect, the demand for these products, make our products less competitive and have an adverse effect on our business, results of operations and margins. Any of these factors, individually or together, could have a material adverse effect on our business, financial condition, results of operations and cash flows. Also, in some foreign jurisdictions, we may be subject to laws limiting the right and ability of entities organized or operating therein to pay dividends or remit earnings to affiliated companies unless specified conditions are met. These factors may adversely affect our future profits. Part of our strategy is to expand our worldwide market share and reduce costs by strengthening our international distribution capabilities and sourcing components in lower cost countries, such as China, Mexico, Hungary and Malaysia, including through the use of our new facility in Monterrey, Mexico. Implementation of this strategy may increase the impact of the risks described above, and we cannot assure you that such risks will not have a material adverse effect on our business, results of operations or financial condition. Other risks of doing business in international markets include the increased risks and burdens of complying with different legal and regulatory standards, difficulties in managing and staffing foreign operations, recruiting and retaining talented direct sales personnel, limitations on the repatriation of funds and fluctuations of foreign exchange rates, varying levels of internet technology adoption and infrastructure and our ability to enforce contracts and our intellectual property rights in foreign jurisdictions. Additionally, there are risks associated with fundamental changes to international markets, such as those that may occur as a result of the Russian invasion of Ukraine. In addition, in connection with Russia's invasion of Ukraine, the U.S. has imposed, and may impose additional, financial and economic sanctions and export controls against Russia and certain Russian organizations and individuals, with similar actions effected by the European Union and the U.K. and other jurisdictions. As a result, we decided to exit from our operations in Russia in their entirety (an immaterial part of the Company's overall business). Furthermore, there is no guarantee that the current Russian invasion of Ukraine will not draw military intervention from other countries or further retaliation from Russia, which, in turn, could lead to a much larger conflict beyond its current geographic, political and economic scope. In addition, in February 2026, the United States and Israel launched coordinated military strikes against Iran, which retaliated with missile attacks across the region. The ongoing conflict and any further escalation, including additional military actions, retaliatory measures, sanctions, disruptions to trade or transportation routes, cyberattacks, or other governmental or market responses, has and could continue to lead to significant disruption of global energy supplies and increases in global energy prices, heighten inflationary pressures on our input costs and supply chains, adversely affect global supply chains, energy markets, commodity prices, currency exchange rates, interest rates, financial markets and overall macroeconomic conditions,increase the cost or reduce the availability of debt financing, and adversely impact customer spending patterns in markets in which we operate. If any further escalation in these or other conflicts should occur, supply chain, trade routes and markets currently served by the Company could be adversely affected and other risks discussed in this Form 10-K may be exacerbated. In addition, a further escalation could disrupt the supply of oil and natural gas in Europe, impacting our ability to operate our European manufacturing facilities, which, in turn, could materially adversely affect the Company's business operations and financial performance. In addition, our success in international expansion could be limited by barriers to international expansion such as adverse tax consequences and export controls. Changes in applicable tax laws and regulations, or their interpretation and application, including the possibility of retroactive effect, could affect our income tax expense and profitability. Certain provisions of the Inflation Reduction Act passed in 2022, including a 15% corporate alternative minimum tax, as well as the similar 15% global minimum tax under the Organization for Economic Cooperation and Development's Pillar Two Global Anti-Base Erosion Rules, may impact our income tax expense, profitability, and capital allocation decisions and may negatively impact our effective tax rate. If we cannot manage these risks effectively, the costs of doing business in some international markets may be prohibitive or our costs may increase disproportionately to our revenue.

Our products are sold in many countries around the world. Thus, a portion of our revenues (approximately $525,118,000 in our fiscal year ended March 31, 2026) are generated in foreign currencies, including principally the Euro, the Japanese Yen, the British Pound, the Canadian Dollar, the South African Rand, the Brazilian Real, the Mexican Peso, and the Chinese Yuan, and while much of the costs incurred to generate those revenues are incurred in the same currency, a portion is incurred in other currencies. Since our financial statements are denominated in U.S. dollars, changes in currency exchange rates between the U.S. dollar and other currencies have had, and will continue to have, a currency translation impact on our earnings. Currency fluctuations may impact our financial performance in the future.

The U.S. Foreign Corrupt Practices Act ("FCPA") and similar worldwide anti-corruption laws generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. Our internal policies mandate compliance with these anti-corruption laws, and we incur meaningful costs complying with these laws. We operate in many parts of the world that have experienced corruption to some degree, and in certain circumstances, strict compliance with anti-corruption laws may conflict with local customs and practices. Despite our training and compliance programs, we cannot assure you that our internal control policies and procedures always will protect us from reckless or criminal acts committed by our employees or agents. In the event that we believe or have reason to believe that our employees or agents have or may have violated applicable anti-corruption laws, including the FCPA, we may be required to investigate or have outside counsel investigate the relevant facts and circumstances. In addition, we are subject to and must comply with all applicable export controls and economic sanctions laws and embargoes imposed by the U.S. and certain other governments. Changes in export control or trade sanctions laws may restrict our business practices, including cessation of business activities in sanctioned countries or with sanctioned entities, and may result in modifications to compliance programs and increase compliance costs, and violations of these laws or regulations may subject us to fines, penalties and other sanctions, such as loss of authorizations needed to conduct aspects of our international business or debarments from export privileges. Violations of the FCPA or export controls or sanctions laws and regulations may result in severe criminal or civil sanctions, and we may be subject to other liabilities, which could negatively affect our business, financial condition, results of operations, and cash flows. Our continued expansion outside the U.S., including in developing countries, could increase these risks in the future.